TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992
TM-9-2815-205-34

  TM-9-2815-205-34 - Page 47 of 596

TM 9-2815-205-34
2-6. COOLANT PUMP AND IDLER PULLEY ASSEMBLY
b. Installation
NOTE
REMOVAL/INSTALLATION (Cont)
For models 5063-5393 and 5063-539L, water by-pass hose and two clamps will be
installed in Para 2-4.
(1) Slide hose (7) and two clamps (6) onto coolant pump (8).
(2) Position coolant pump gasket (15) to oil cooler (14).
NOTE
For models 5063-5393 and 5063-539L, it will be necessary to install fuel line clamp
under screw at front lower position when mounting coolant pump to oil cooler.
(3) Install coolant pump (8), four flat washers 12), four Iockwashers (11), four screws (10), and
socket head screw (13) on oil cooler (14). Torque socket head screw and four screws to 13-17
Ib-ft (18-23 N•m).
2-20
Change 1


Back to Top