TM-9-2815-205-34
ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
AUGUST 1992
TM-9-2815-205-34 - Page 52 of 596
TM 9-2815-205-34
2-10. OIL LEVEL GAGE ROD REMOVAL/INSTALLATlON (MODELS 5063-5395, 5063-5396 AND
5063-539F)
This task covers: a. Removal
b. Installation
INITIAL SETUP
MODELS
MATERIALS/PARTS
5063-5395 5063-5398 5063-539F
1
Lockwasher (App F, Item 99)
TOOLS AND SPECIAL TOOLS
Tool kit, general mechanics (App B, Item 107)
Wrench, torque (App B, Item 116)
a. Removal
(1) Remove oil gage rod (1) from tube
assembly (2).
(2) Unscrew tube assembly (2) from adaptor
(3) in rear left side of oil pan.
NOT E
Loosen left exhaust manifold
nuts (4) to remove tube
assembly.
(3) Remove screw (5), Iockwasher (6), nut
(7), clip (8), and tube assembly (2) from
bracket (9) on left exhaust manifold. If
necessary, remove clip from tube
assembly. Discard lockwasher.
b. Installation
(1)
(2)
(3)
If removed, install clip (8) on tube
assembly (2). Loosely install tube
assembly in adaptor (3).
NOT E
Loosen left exhaust manifold
nuts (4) to install tube assem-
bly. Torque screw to 30-35 Ib-ft
(41-47 N·m).
Install screw (5), clip (8) (facing
rearward), tube assembly (2), lockwasher
(6), and nut (7) on bracket (9) at left
exhaust manifold. Torque screw to 30-35
Ib-ft (41-47 N·m).
Tighten tube assembly (2) in adaptor (3).
2-25
Back to Top
