TM-9-2815-205-34
ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
AUGUST 1992
TM-9-2815-205-34 - Page 55 of 596
TM 9-2815-205-34
2-12. OIL FILTER ASSEMBLY AND ADAPTOR REMOVAL/INSTALLATION (MODEL 5063-5392)
This task covers: a. Removal
b. Installation
INITIAL SETUP
MODELS
MATERIALS/PARTS
5063-5392
8
Lockwashers (App F, Item 99)
1
Gasket (App F, Item 32)
TOOLS AND SPECIAL TOOLS
Tool kit, general mechanics (App B, Item 107)
Wrench, torque (App B, Item 116)
Removal
(1)
(2)
(3)
(4)
(5)
(6)
Disconnect two hose assemblies (1) from two elbows (2) on oil filter head (3). Remove two
hose assemblies (1) from two elbows (4) on oil filter adaptor (5).
Remove four screws (6), four flat washers (7), four Iockwashers (8), four nuts (9), and oil filter
assembly (10) from bracket (11). Discard Iockwashers.
Disconnect turbocharger oil supply hose (12) from elbow (13) on top of oil filter adaptor (5).
If necessary, remove two elbows (4) from oil filter adaptor (5).
Remove two short screws (14), two long screws (15), four Iockwashers (16), and four flat
washers (17) from oil filter adaptor (5) on rear left side of cylinder block. Discard Iockwashers.
Remove oil filter adaptor (5) and gasket (18) by tapping with a soft head hammer to break seal.
If necessary, remove elbow (13) from adaptor (5). Discard gasket.
Installation
(1)
(2)
(3)
(4)
(5)
(6)
If removed, install elbow (13) on adaptor (5).
Install gasket (18), oil filter adaptor (5), four flat washers (17), four Iockwashers (16), two short
screws (14), and two long screws (15) to left side rear of cylinder block. Torque screws to
30-35 Ib-ft (41-47 N
.
m).
If removed, install two elbows (4) in oil filter adaptor (5).
Install four screws (6), four flat washers (7), oil filter assembly (10), four Iockwashers (8), and
four nuts (9) on bracket (11). Torque screws to 30-35 Ib-ft (41-47 N.m).
Connect two hose assemblies (1) to two elbows (4) in oil filter adaptor (5) and to two elbows (2)
in oil filter head (3). Tighten connections securely.
Connect turbocharger oil supply hose (12) to elbow (13) on top of oil filter adaptor (5). Tighten
hose connection securely.
2-28
Back to Top
