TM-9-2815-205-34
ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
AUGUST 1992
TM-9-2815-205-34 - Page 61 of 596
TM 9-2815-205-34
2-16. ENGINE/TRANSMISSION OIL COOLER REMOVAL/INSTALLATION (MODEL 5063-5299)
This task covers: a. Removal
b. Installation
INITIAL SETUP
MODELS
5063-5299
TOOLS AND SPECIAL TOOLS
Tool kit, general mechanics (App B, Item 107)
Wrench, torque (App B, Item 116)
MATERIALS/PARTS
MATERIALS/PARTS (Cont)
1
Gasket (App F, Item 80)
1
Gasket (App F, Item 28)
EXPENDABLE/DURABLE SUPPLIES
2
Studs (App C, Item 53)
EQUIPMENT CONDITION
10
Lockwashers (App F, Item 98)
1
Gasket (App F, Item 41)
Para Description
2-6 Coolant pump removed.
a. Removal
(1)
(2)
(3)
(4)
(5)
Loosen two hose clamps (1) on hose (2) over water outlet elbow (3).
Remove long bolt (4) through clip (5), short bolt (6), two Iockwashers (7), two flat washers (8),
water outlet elbow (3), hose (2), two hose clamps (1), and gasket (9) from cylinder block.
Remove two hose clamps (1) and hose (2) from elbow (3). Discard gasket and Iockwashers.
If necessary, remove pipe plug (10) from water outlet elbow (3).
Remove five bolts (11), five Iockwashers (12), and five flat washers (13) from upper section of
oil cooler assembly (14). Discard Iockwashers.
Install two guide studs (15) in positions (A) and (B) through oil cooler assembly (14).
2-35
Back to Top
