TM-9-2815-205-34
ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
AUGUST 1992
TM-9-2815-205-34 - Page 87 of 596
TM 9-2815-205-34
2-22. FUEL FILTERS AND MOUNTING BRACKET
5063-5395 and 5063-539F)
REMOVAL/INSTALLATION (MODELS
This task covers: a. Removal
b. Installation
INITIAL SETUP
MODELS
MATERIALS/PARTS
5063-5395 5063-539F
6
Lockwashers (App F, Item 99)
TOOLS AND SPECIAL TOOLS
Tool kit, general mechanics (App B, Item 107)
Wrench, torque (App B, Item 116)
a. Removal
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Disconnect hose assembly (1) at elbow
(2) on fuel strainer assembly (3).
If necessary, remove elbow (2) and two
pipe plugs (4) from fuel strainer assembly
Disconnect hose assembly (5) and hose
assembly (6) from tee (7) in fuel filter
assembly (8).
Disconnect hose assembly (9) at elbow
(10) on fuel filter assembly (8).
If necessary, remove tee (7) and elbow
(10) from fuel filter assembly (8).
NOT E
To remove two bolts from
upper section of fuel filter
assembly, remove the lower
canister due to interference
(Para 2-37).
Remove two nuts (11), two Iockwashers
(12), two flat washers (13), two screws
(14), fuel filter assembly (8), and fuel
strainer assembly (3) from filter mounting
bracket (15). Discard Iockwashers.
Remove two short screws (16), two long
screws (17), four Iockwashers (18), four
flat washers (19), filter mounting bracket
(15), and gasket (20) from flywheel
housing. Discard gasket and
Iockwashers.
(3) .
(2-59 blank)/2-60
Back to Top
