TM-9-2815-205-34
ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
AUGUST 1992
TM-9-2815-205-34 - Page 89 of 596
TM 9-2815-205-34
2-23. FUEL FILTERS AND MOUNTING BRACKET REMOVAL/INSTALLATION (MODEL
5063-5398)
This task covers: a. Removal
b. Installation
INITIAL SETUP
MODELS
MATERIALS/PARTS
5063-5398
5
Lockwashers (App F, Item 99)
TOOLS AND SPECIAL TOOLS
Tool kit, general mechanics (App B, Item 107)
Wrench, torque (App B, Item 116)
a. Removal
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
Disconnect hose assembly (1) from
elbow (2) on fuel strainer assembly (3).
If necessary, remove elbow (2) from fuel
strainer assembly (3).
Disconnect hose assembly (4) from
elbow (5) in fuel filter assembly (6).
Disconnect hose assembly (7) from
elbow (8) in fuel filter assembly (6).
Disconnect hose assembly (9) from
elbow (10) in fuel filter assembly (6).
Remove pipe plug (11) and three elbows
(5, 8, an 10) from fuel filter assembly
(6).
NOT E
To remove two screws from
upper section of fuel filter
assembly, remove the lower
canister (Para 2-37). Canister
and filter head interfere with
screws.
Remove two nuts (12), two Iockwashers
(13), two flat washers (14), two screws
(15), fuel filter assembly (6), and fuel
strainer assembly (3) from filter mounting
bracket (16). Discard Iockwashers.
Remove short screw (17), two long screws (18), three Iockwashers (19), two flat washer (20),
special washer (21), filter mounting bracket (16), water cover (22), and gasket (23) from rear of
right cylinder head. Discard gasket and Iockwashers.
2-62
Back to Top
