TM-9-2815-205-34
ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
AUGUST 1992
TM-9-2815-205-34 - Page 98 of 596
(9)
(10)
(11)
(12)
TM 9-2815-205-34
Coat threads on elbow (4) with a pipe sealing compound and install in left side of cylinder block
Tighten securely with port facing rear and downward at a 45 degree angle.
Install elbow (6) in oil pan and tighten securely with port facing outward from engine.
Install elbow (2) in top of check valve (3) and tighten securely. If removed, install clip (10)
on
check valve.
Connect upper hose assembly (1) to elbow (4) in cylinder block. Tighten securely.
(13)
(14)
(15)
Connect lower hose assembly (5) to elbow (6) in oil pan. Tighten securely.
If oil cooler is installed, install screw (7) through clip (10), lockwasher (8), and
oil cooler. Torque screw to 13-17 lb-ft (18-23 N•m).
flat washer (9) in
Connect hose assembly (1) to elbow (2), in check valve (3), and hose assembly (5) to bottom of
—
check valve. Tighten securely.
END OF TASK
FOLLOW-ON MAINTENANCE
Para Description
2-25 Install electric starter.
2-21 Install fuel filters and mounting brackets (models 5063-5393 and 5063-539L).
Change 1
2-71
Back to Top
