TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 106 of 596

TM 9-2815-205-34

(4)

(5)

(6)

(7)

Install engine in lower half of container

(17).

Install four screws (12), four flat washers

(13), and four nuts (14) in rear support

(15) to connect support (15) to two engine

supports (16). Torque screws to 107-118

lb-ft (150-165 NŽm).

Install retaining strap (10), two flat

washers (9), and two screws (8) on

engine front support (11). Torque two

screws to 24-29 lb-ft (34-41 N•m).

Remove beam-type sling (1).

Install gasket (7), air inlet (6), spacer (5),

two flat washers (4), and two screws (3)

on front right side of engine.

END OF TASK

2-79