TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992
TM-9-2815-205-34

  TM-9-2815-205-34 - Page 108 of 596

TM 9-2815-205-34
Do not discard preformed packing (17) found on front trunnion of model 5063-5299.
Store this packing in container trunnion block and use for shipping purposes only. Use
a new packing when installing engine in vehicle.
(5) For model 5063-5299, remove two screws (18), two Iockwashers (19), upper shipping trunnion
block (20), preformed packing (17), and lower shipping trunnion block (21) from front of engine.
(6) For model 5063-5299, install two screws (18), two Iockwashers (19), upper shipping trunnion
block (20), and preformed packing (17) on lower shipping trunnion block (21). Tighten screws.
(7) For model 5063-5299, install two screws (3), four flat washers 6), two Iockwashers (5), two
nuts (4) (located in mailbag), and shipping trunnion assembly (7) on lower half of container
(10). Tighten screws.
NOTE
2-81


Back to Top