TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 107 of 596

TM 9-2815-205-34

2-31. ENGINE FROM/TO CONTAINER (MODELS 5063-5299,5063-5392, 5063-5393 AND

5063-539L)

This task covers: a. Removal

b. Installation

INITIAL SETUP

MODELS

5063-5299 5063-5392 5063-5393 5063-539L

TOOLS AND SPECIAL TOOLS

Tool set, general mechanics (App B, Item 107)

Sling, beam-type (App B, Item 92 )

Wrench, torque (App B, Item 116)

MATERIALS/PARTS

4

Lockwashers (App F, Item 101)

EQUIPMENT CONDITION

Para Description

2-3 Container top removed.

PERSONNEL REQUIRED: 2

a. Removal

(1)

(2)

(3)

(4)

Attach beam-type sling (1) to lifting

brackets (2) and support engine with lifting

Remove two screws (3), two nuts (4), two

lockwashers (5), and four flat washers (6)

connecting trunnion assembly 7) to

forward container support (8). Store

screws, washers, and nuts in mailbag (9)

in lower half of container (10).

Remove four screws (11), four nuts (12),

four lockwashers (13), and four flat

washers (14), connecting rear support (15)

to two container mounting brackets (16).

Discard lockwashers.

Never crawl under equipment

when performing mainte-

nance unless equipment is

securely blocked. Keep clear

of equipment when it is being

raised or lowered. Do not al-

low heavy components to

swing while suspended by

lifting device. Exercise cau-

tion when working near a ca-

ble or a chain under tension.

Equipment may drop or shift

and injury to personnel may

result.

Remove engine from lower half of

container (10).

2-80

Change 1