TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 115 of 596

2-33. ENGINE INSTALLATION/REMOVAL TO MAINTENANCE STAND

This task covers: a. Maintenance Stand Preparation

b. Installation

c. Removal

MODELS

TOOLS AND SPECIAL TOOLS (Cont)

All

Drain unit (App B, Item 21)

Brackets, engine mounting (App B, Item 10)

TOOLS AND SPECIAL TOOLS

Tool kit, general mechanics (App B, Item 107)

Stand, maintenance (App B, Item 95)

MATERIALS/PARTS

8

Lockwashers (App F, Item 99)

4

Lockwashers (App F, Item 100)

PERSONNEL REQUIRED: 2

a. Maintenance Stand Preparation

(1) Assemble engine cradle (1) and maintenance stand (2) together using hole location number 5.

(2) Install four engine mounting brackets (3), eight bolts (4), eight flat washers (5), and eight

Iockwashers (6) to engine block (two bolts per bracket). Leave brackets loose for adjustment.

b. Installation

(1) Attach a beam-type sling to engine lifting brackets and lift engine onto maintenance stand (2).

(2) Install four bolts (7), four Iockwashers (8), eight flat washers (9), and four nuts (10) in four

mounting brackets (3) and side rails of cradle (1). Tighten stand and bracket bolts.

c. Removal

(1)

(2)

(3)

Attach beam-type lifting sling to engine lifting brackets with engine on maintenance stand (2).

Remove four bolts (7), four Iockwashers (8), eight flat washers (9), and four nuts (10)

connecting four mounting brackets (3) to side rails of cradle (1). Discard Iockwashers.

Remove eight bolts (4), eight flat washers

(5), eiqht Iockwashers (6), and four

mounting brackets (3) from engine block.

Discard lockwashers.

END OF TASK

2-88

TM 9-2815-205-34

INITIAL SETUP

Sling, beam-type (App B, Item 92)

Cradle (App B, Item 19)