TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 104 of 596

TM 9-2815-205-34

WARNING

Never crawl under

equipment when performing maintenance unless equipment

is securely blocked. Keep clear of equipment when it i

S

being raised or lowered.

Do not allow heavy components to swing while suspended by lifting device.

Exercise caution when working near a cable or a chain under tension.

Equipment may drop or shift and injury to personnel may result.

(5) Remove engine from lower half of container (17).

Screw installed in the flywheel housing at eight o’clock position cannot be removed

when the oil filter adapter is installed due to interference.

(6) With engine supported by sling, remove two screws (18) and two flat washers (19) from right

side of engine support (15). Remove two screws (20), four flat washers (21), and two nuts (22)

from left side. Remove remaining two screws (23), four flat washers (24), two nuts (25), and

engine support from engine. Place screws, washers, and nuts in mailbag (26) and store engine

support and mailbag in lower half of container.

CAUTION

Always install top of container on bottom of container (Para 2-3) after the engine has

been removed to avoid weather damage of container.

2-77

NOTE