TM-9-2815-205-34
ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
AUGUST 1992
TM-9-2815-205-34 - Page 88 of 596
TM 9-2815-205-34
b. Installation
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Install gasket (20), filter mounting bracket (15), four flat washers (19), four Iockwashers (18),
two long screws (17) (into right cylinder head), and two short screws (16) (into flywheel
housing). Torque screws to 30-35 Ib-ft (41-47 N·m).
NOT E
To install two screws (14) in upper section of fuel filter assembly, remove the lower
canister due to interference (Para 2-37).
Install two screws (14), fuel filter assembly (8), fuel strainer assembly (3), two flat washers (13),
two Iockwashers (12), and two nuts (11) on filter mounting bracket (15). Torque nuts to 30-35
Ib-ft (41-47 N·m).
If removed, install tee (7) and elbow (10) in fuel filter assembly (8).
If removed, install elbow (2) and two pipe plugs (4) in fuel strainer assembly (3).
Connect hose assembly (9) to elbow (10) on fuel filter assembly (8). Tighten hose connection.
Connect hose assembly (5) and hose assembly (6) to tee (7) on fuel filter assembly (8). Tighten
hose connections.
Connect hose assembly (1) to elbow (2) on fuel strainer assembly (3). Tighten hose
connection.
END OF TASK
2-61
Back to Top
