TM-9-2815-205-34
ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
AUGUST 1992
TM-9-2815-205-34 - Page 93 of 596
TM 9-2815-205-34
2-25. ELECTRIC
This task covers:
STARTER REMOVAL/lNSTALLATION
a. Removal
b. Installation
INITIAL SETUP
MODELS
EQUIPMENT CONDITION
All
Para Description
2-21 Fuel filters and mounting bracket removed
TOOLS AND SPECIAL TOOLS
(models 5063-5393 and 5063-539L)
Tool kit, general mechanics (App B, Item 107)
3-12.1 Disconnect glow plug power harness
Wrench, torque (App B, Item 116)
(model 5063-539L)
MATERIALS/PARTS
Gasket (App F, Item 57)
Lockwashers (App F, Item 102)
a. Removal
Starter motor is heavy. Provide ade-
quate support to electric starter to
prevent injury to personnel during
NOTE
Models 5063-5392, 5063-5393 and
5063-539L have a gasket between
electric starter and flywheel housing.
Remove three bolts (1), three Iockwashers
(2), electric starter (3), and gasket (4) from
fIywheel housing. Discard gasket and
Iockwashers.
b. Installation
Install gasket (4), electric starter (3), three
Iockwashers (2), and three bolts (1) on
flywheel housing, Torque bolts to 95-105
Ib-ft (129-143 N•m).
END OF TASK
FOLLOW-ON MAINTENANCE
Para Description
2-21 Install fuel filters and mounting bracket
(models 5063-5393 and 5063-539L).
3-12.1 Connect glow plug power harness (model 5063-539L)
2-66
Change 1
Back to Top
