TM-9-2815-205-34
ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
AUGUST 1992
TM-9-2815-205-34 - Page 36 of 596
TM 9-2815-205-34
Never crawl under equipment when performing maintenance unless equipment
is securely blocked. Keep clear of equipment when it is being raised or lowered.
Do not allow heavy components to swing while suspended by lifting device.
Exercise caution when working near a cable or a chain under tension.
Equipment may drop or shift and injury to personnel may result.
(3) Using a sling, remove upper container half (5).
NOTE
Container for models 5063-5395, 5063-5398, and 5063-539F, has no access cover (6)
and desiccant is stored in a wire basket (7) in bottom of container.
(4) Open access cover (6) in upper container half (5) and remove desiccant bags. Discard
desiccant.
b. Installation
NOTE
•
Container (NSN 8145-00-138-7809) for model 5063-5299 requires 62 units of Class 1
desiccant.
• Container (NSN 2815-01-232-9447) for models 5063-5299,5063-5392, 5063-5393
and 5063-539L requires 128 units of Class 1 desiccant.
●
Container for models 5063-5395, 5063-5398, and 5063-539F, requires 128 units of
Class 1 desiccant. It has no access cover. Store desiccant in a wire basket (7) in bottom
of container.
(1) Install Class 1 desiccant through access port (8) in upper container half (5) and screw access
cover (6) onto port.
Change 1
2-9
Back to Top
