TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992
TM-9-2815-205-34

  TM-9-2815-205-34 - Page 405 of 596

TM 9-2815-205-34
d. Assembly
(1) If removed, install draincock (8) in bottom of oil cooler housing (6).
•
The lower compartment oil cooler, formerly used for the transmission, is no longer
required to be installed. To install cover without this oil cooler, use 1/4 inch shorter bolts
and studs.
•
Do not install bolts in locations (A), (B), and (C).
(2) Install gasket (5), cover (4), five flat washers (3), five Iockwashers (2), and five bolts (1) on oil
cooler housing (6). Torque bolts to 13-17 lb-ft (18-23 N-m).
(3) If removed, install two pipe plugs (7) in cover (4).
END OF TASK
FOLLOW-ON MAINTENANCE
Para Description
2-19 Install engine oil cooler.
3-275


Back to Top