TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 213 of 968

TM 9-2815-210-34-2-2

FRAME

7

1.

Put drive gear (1) on oil pump shaft (2).

2.

On all engines except LDS-465-2, put on slotted nut (3). Using torque

wrench, tighten nut to 44 to 46 pound-feet. Put in cotter pin (4).

3.

On engine LDS-465-2, put on flat washer (5) and locknut (6). Using torque

wrench, tighten locknut to 44 to 46 pound-feet.

4.

Take oil pump assembly (7) out of vise.

END OF TASK

4-194