TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 885 of 968

TM 9-2815-210-34-2-2

b. Flame Heater Nozzle Test.

FRAME 1

1.

Take off two fuel line fittings (1).

2.

Takeoff and shake flame heater nozzle (2).

3.

Put back fuel line fittings (1) into nozzle (2).

4.

Put container (3) under nozzle (2).

5.

Turn heater to ON position for 15 seconds, then turn heater to OFF position.

6.

Check for fuel in container (3).

7.

If no fuel is in container (3), test and repair flame heater system. Refer to

para 4-58 through 4-80.

8.

If fuel is in container (3), put back flame heater nozzle (2).

END OF TASK

6-30