TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 887 of 968

TM 9-2815-210-34-2-2

FRAME

2

1.

2.

3.

4.

5.

6 .

Place main switch (1) in 24 VOLT position (2). Turn knob (3) on OVER-

SPEED GOVERNOR so that needle (4) points to 2900 RPM. Press RESET

button (5).

Place SPEED METER RANGE switch (6) in HI rpm position.

Place POWER METER RANGE switoh (7) in LO hp position.

Close load control (8) by turning to right until it is finger tight.

Open unload control (9) by turning to left.

Check and set throttle (10) so it will fully open and fully close engine

speed control.

GO TO FRAME 3

6-32