TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 889 of 968

TM 9-2815-210-34-2-2

b .

Engine Starting and Running Instructions.

FRAME 1

1.

Open throttle (1) to idle position.

2.

Press ENGINE START button (2).

3.

When engine starts, adjust throttle (1) to set engine speed to 500 to 600

RPM on speed gage (3).

4.

When water temperature gage (4) reaches 160° to 185°F, check oil temperature

gage (5).

Oil temperature should be 255° to 265°F. If temperature is too

high, engine must be repaired.

END OF TASK

6-34