TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 886 of 968

TM 9-2815-210-34-2-2

6-6. BASIC ENGINE RUN-IN.

Be alert at

WARNING

all times during engine operation for

exhaust odors and exposure symptoms. If either

are present, immediately ventilate work area.

Permanent brain damage or death can result from

severe exposure.

Use hearing protection during this test. The

test is very noisy and the noise can cause

damage to your hearing.

a.

Pre-Starting Instructions.

(1) Fill engine crankcase with oil. Refer to LO 9-2320-209-12/1 and

LO 9-2320-211-12.

(2) Open dynamometer

(3) Open dynamometer

FRAME 1

fuel supply valves.

water supply valves.

1.

Turn drain control knob (1) to right until finger tight.

2.

Turn drain control knob (1) to left one turn.

3.

Turn thermostat control knob (2) to right until water can be heard entering

cooling column (3).

4.

When water level in sight glass (4) no longer changes, turn thermostat

control knob (2) to left until it stops.

GO TO FRAME 2

6-31