TM-9-2815-225-34-P

ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2005

TM-9-2815-225-34-P - Page 272 of 736

TM 9-2815-225-34&P

0028 00

0028 00-4

FRONT GEAR COVER (Contd)

ASSEMBLY

CAUTION

All surfaces in contact with oil seals must be completely free

of oil. Oil on a teflon seal will destroy its sealing properties.

1.

Align oil holes in new sleeve bushing (6) with oil holes in front gear cover (7).

2.

Using mandrel and press, install sleeve bushing (6) in front gear cover (7).

3.

Apply pipe sealant to three threaded plugs (8) and install in front gear cover (7).

4.

Install new O-ring (4) on camshaft support (2).

5.

Install shims (3) and camshaft support (2) on front gear cover (7) with three screws (1). Tighten

screws (1) 25 lb-ft (34 N

•

m).

6.

Using puller/installer and oil seal expander, install new crankshaft oil seal (9) in front gear

cover (7).

7.

Using puller/installer, install new accessory drive oil seal (5) in front gear cover (7). Ensure oil

seal (5) is flush with edge of front gear cover (7).

8.

Install front gear cover on engine (WP 0042 00).

Figure 2. Front Gear Cover Assembly.

END OF WORK PACKAGE

7

1

2

3

8

8

8

9

5

6

4