TM-9-2815-225-34-P

ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2005
TM-9-2815-225-34-P

  TM-9-2815-225-34-P - Page 279 of 736

TM 9-2815-225-34&P
0030 00
0030 00-1
Tools and Special Tools
General mechanic’s tool kit:
automotive (Item 1, WP 0061 00)
Maintenance and repair shop equipment:
automotive (Item 2, WP 0061 00)
Automotive maintenance and repair
supplemental set no. 2 (Item 3, WP 0061 00)
Solenoid valve wrench (Item 6, WP 0061 00)
C-clamp (Item 7, WP 0061 00)
Materials/Parts
OE/HDO 10 lubricating oil
(Item 19, WP 0060 00)
Six outer control valve springs
(Item 1, Table 14, WP 0062 00)
Six inner control valve springs
(Item 2, Table 14, WP 0062 00)
Six upper seal rings
(Item 3, Table 14, WP 0062 00)
Six center seal rings
(Item 4, Table 14, WP 0062 00)
Six lower seal rings
(Item 5, Table 14, WP 0062 00)
Six slave piston springs
(Item 6, Table 14, WP 0062 00)
Six master piston springs
(Item 7, Table 14, WP 0062 00)
Six locknuts (Item 8, Table 14, WP 0062 00)
Equipment Condition
Engine brake retarder removed from engine
(WP 0011 00).
DIRECT SUPPORT AND GENERAL SUPPORT
MAINTENANCE MANUAL
INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
FOR
M915, M915A1, M915A4, M916, M920 VEHICLES
P/N NTC400-3652-02
CUMMINS NTC-400 BIG CAM I DIESEL ENGINE
W/CONTAINER
P/N 11669835
CUMMINS NTC-400 BIG CAM III DIESEL ENGINE
W/CONTAINER
ENGINE RETARDER
DISASSEMBLY, CLEANING AND INSPECTION, ASSEMBLY
INITIAL SETUP:


Back to Top