TM-9-2815-225-34-P
ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2005
TM-9-2815-225-34-P - Page 287 of 736
TM 9-2815-225-34&P
0031 00
0031 00-3
AIR COMPRESSOR (Contd)
Figure 3. Air Compressor Disassembly.
DISASSEMBLY (Contd)
WARNING
Use gloves during piston pin removal if piston has been soaked
in hot water. Failure to comply may result in injury to
personnel.
CAUTION
Do not force or drive piston pin out from piston bore. If piston
cannot be removed by hand, soak piston assembly in hot water
to expand piston bore and allow for removal of piston pin.
Failure to comply may result in damage to piston.
23.
Remove piston pin (19) and piston (20) from connecting rod (21).
CAUTION
Do not scratch or score piston during piston ring removal.
Failure to comply may result in damage to piston.
24.
Remove three piston rings (18) from piston (20). Discard piston rings (18).
25.
Using press and mandrel, remove bushing (16) from connecting rod (21). Discard bushing (16).
26.
Using press and air compressor bushing, remove bearing (26) from cylinder housing (24). Discard
bearing (26).
35
37
46
45
43
39
6
7
8
34
40
36
38
41
42
15
14
13
12
11
10
9
44
18
17
17
16
26
28
30
32
29
5
31
33
27
25
24
21
20
19
23
22
Back to Top
