TM 9-2910-226-34
3-27. Repair of Timing Device Assembly.
a.
timing device springs (A). Remove
Disassembly.
end play spacer (C), sliding gear
(1) Refer to figure 3-95. Remove the three
spider thrust plate
(A),
and
(F).
sliding gear (B),
spacer (D) and
Figure 3-95. Removing sliding gear, spider assembly and associated parts.
(2) Refer to figure 3-96. Remove four capscrews
b. Inspection and
-
Repair.
Inspect and repair
lockwashers (B), and timing cover (C). Remove
timing device assembly as follows:
discard timing cover gasket (D).
(1) Refer to figure 3-97. Check the components
of the timing device assembly against the limits
specified in the repair standards (para 3-63) and
replace the components when they do not meet these
requirements.
KEY to fig. 3-97
A
B
C
D
E
G
H
F
J
K
L
M
N
Q
Preformed packing
¼-inch lockwasher
1/4x5/8 machine screw
Timing cover
Timing cover gasket
Thrust plate
Weight and spider assembly
Housing assembly
1 Bushing type bearing
2 Housing
End play spacer
Sliding gear spacer
Sliding gear
Timing device spring
Camshaft nut
Timing device
Camshaft nut setscrew
P
Figure 3-96. Removing or installing timing cover.
3-60