TM-9-2910-226-34
PUMP, FUEL, METERING AND DISTRIBUTING, ASSEMBLY
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT, MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS
JUNE 1974
TM-9-2910-226-34 - Page 54 of 208
TM 9-2910-226-34
remove and discard
remove and discard
washer (E). Remove pin (G),
packing (F).
Figure 3-20. Removing oil filter or oil duct sealing screw assembly
(code F and G pumps).
b.
Refer to figure 3-21. Install pump holding
fixture on pump body and position fixture in a vise.
Remove four hydraulic head plain nuts (A), four stud
sleeves (B) and hydraulic head assembly (C) from
housing.
Figure 3-21. Removing hydraulic head assembly using pump
holding fixture–4910-870-2128.
3-8
Back to Top
