TM-9-6920-430-14

COOLANT RECHARGING UNIT, TRAINING GUIDED MISSILE SYSTEM M80 AND CHARGER, BATTERY PP-7309/T

TECHNICAL MANUAL; OPERATOR’S AND ORGANIZATIONAL DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

AUGUST 1980

TM-9-6920-430-14 - Page 137 of 180

TM 9-6920-430-14

3-17. TRAINER FILL PORT COVER, RETAINING RING, AND PREFORMED

PACKING REPLACEMENT (Figure 3-3).

a.

Loosen the small bleed screw (2) located on the fill port cover (1) two turns

counterclockwise to permit safe venting of any gas trapped in fill port well.

b.

Using a large flat-blade screwdriver, loosen (turning counterclockwise) and remove

the fill port cover (l).

c.

Remove the preformed packing (5) from the fill port inlet (3) using a spudger (Item

No. 17, Appendix E).

d.

Inspect retaining ring (4) to assure proper seating.

e.

Insert replacement preformed packing into fill port inlet and reinstall the fill port

cover (1).

Figure

3-3.

Retaining Ring and Packing Replacement

Change 3

3-75