MWO-5-2350-262-35-3
ARMORED COMBAT EARTHMOVER (ACE), M9
MODIFICATION WORK ORDER
MWO-5-2350-262-35-3 - Page 13 of 45
MWO 5-2350-262-35-3
2-7
3.
Remove track control wiring harness as follows:
a.
Remove track control wiring harness connector (Figure 2-3, 1) from suspension control electrical box (2).
Figure 2-3.
Track Control Wiring Harness.
b.
Remove screw (8), washer (7), and track control wiring harness ground terminal (6) from hydraulic control
lever bracket (5) and set aside for disposition per Chapter 1, Section 1-8, step c.
c.
Remove track control wiring harness connector (3) from track control switch (4).
NOTE
Track control wiring harness is secured to other components as needed by electrical tie down straps.
Cut/remove as required prior to removal.
d.
Set aside track control wiring harness (1) for disposition per Chapter 1, Section 1-8, step c.
1
3
5
4
6
7
8
2
Back to Top
