MWO-5-2350-262-35-3
ARMORED COMBAT EARTHMOVER (ACE), M9
MODIFICATION WORK ORDER
MWO-5-2350-262-35-3 - Page 14 of 45
MWO 5-2350-262-35-3
2
-
8
4.
Remove suspension control electrical box as follows:
a.
Remove two screws (Figure 2-4, 3) and flat washers (2) from instrument panel (4) and retain for future use.
Figure 2-4.
Suspension Control Electrical Box.
b.
Slide suspension control electrical box (1) upward from behind instrument panel (4) and set aside for
disposition per Chapter 1, Section 1-8, step c.
5.
Remove semi-automatic track adjuster manifold as follows:
a.
Relieve hydraulic system pressure per TM 5-2350-262-20-3, Relieving Hydraulic System Pressure.
WARNING
High pressure is present in the M9 hydraulic system.
Do not disconnect any hydraulic system
component unless hydraulic system pressure has been relieved.
Ensure each of the hydraulic
control levers is moved several times through all positions, and the hydraulic tank dipstick is
slowly loosened to relieve pressure.
Failure to comply may result in severe injury to
personnel.
Spilled hydraulic oil is very slippery.
Use caution when entering or working in bowl area.
Wipe up any spilled oil immediately.
Failure to comply may result in severe injury to
personnel.
Do not operate ejector when personnel are in bowl.
Do not work in bowl unless ejector lock is
engaged.
Failure to comply may result in severe injury to personnel.
1
4
2
3
2
3
Back to Top
