MWO-5-2350-262-35-3
ARMORED COMBAT EARTHMOVER (ACE), M9
MODIFICATION WORK ORDER
MWO-5-2350-262-35-3 - Page 18 of 45
MWO 5-2350-262-35-3
2
-
12
d.
Remove locknut (Figure 2-8, 3) and washer (2) from rear fuel tank strap (1) and hull, and move rear fuel tank
strap away from hydraulic track adjusting cylinder (4).
Retain parts for future use.
Figure 2-8.
Track Adjusting Cylinder (2 of 3).
e.
Remove locknut (5), washer (6), screw (9), washer (8), pin (7), and hydraulic track adjusting cylinder (4) from
final drive adjusting flange (10).
Retain parts for future use.
f.
Remove locknut (Figure 2-9, 11), washer (12), screw (14), washer (15), pin (16), and hydraulic track adjusting
cylinder (4) from hull mounting bracket (13).
Retain locknut, washers, screw, and pin for future use.
Set
aside hydraulic track adjusting cylinder for disposition per Chapter 1, Section 1-8, step c.
Figure 2-9.
Track Adjusting Cylinder (3 of 3).
g
.
If damaged, remove two bearings (19).
Remove two hydraulic elbows and o-rings (20) from bottom of
hydraulic track adjusting cylinder.
Remove two plugs (18) and lubrication fittings (17) from hydraulic cylinder.
Set aside for disposition per Chapter 1, Section 1-8, step c.
1
18
HULL
2
3
9
8
7
6
5
4
10
16
15
14
13
19
18
20 19
11
12
17
4
17
Back to Top
