MWO-5-2350-262-35-3
ARMORED COMBAT EARTHMOVER (ACE), M9
MODIFICATION WORK ORDER
MWO-5-2350-262-35-3 - Page 25 of 45
MWO 5-2350-262-35-3
2-19
14. Remove screw (Figure 2-19, 2) and track and blade manifold (1), retain part for future use.
WARNING
Serious hearing loss and eye injury can occur during drilling and grinding operations.
Wear
ear and eye protection.
15. Drill and tap remaining three 0.50 inch (12.70 mm) holes in hull.
16. Install three straight adapters 4F50X-S (Figure 2-20, 2) on track and blade manifold bottom (1), ports CR1, CR2,
and CL1.
Figure 2-20.
Manifold Bottom.
17. Attach front manifold mount (Figure 2-21, 4) and track and blade manifold (1) with screw B1821BH050C100N (3)
and screw retained from Section V, step 14, to two front holes on hull wall.
Torque to 45.0 to 50.0 lb-ft (200.1 to
222.4 N•m).
Figure 2-21.
Manifold.
18. Attach rear manifold mount (2) and track and blade manifold (1) with two screws B1821BH050C100N (3) to two
rear holes on hull wall.
Torque to 45.0 to 50.0 lb-ft (200.1 to 222.4 N•m).
1
2
1
2
3
4
HULL
2
2
Back to Top
