MWO-5-2350-262-35-3
ARMORED COMBAT EARTHMOVER (ACE), M9
MODIFICATION WORK ORDER
MWO-5-2350-262-35-3 - Page 30 of 45
MWO 5-2350-262-35-3
2
-
24
f.
Connect rod end (Figure 2-28, 2) of hydraulic track adjusting cylinder (1) to final drive adjusting flange (8) with
pin (5), washer (6), screw (7), washer (4), and locknut (3), retained from Section III, step 4 or Section IV, step
6e.
Figure 2-28.
Hydraulic Track Adjusting Cylinder (3 of 4).
g.
Tighten locknuts (Figure 2-29, 1 and 4) to 19 to 31 lb-ft (39 to 42 N•m).
Figure 2-29.
Hydraulic Track Adjusting Cylinder (4 of 4).
h.
Lubricate bearings (3) with grease at lubrication fittings (2 and 5).
i.
Connect rear fuel tank strap (Figure 2-30, 1) to hull with washer (2) and locknut (3) retained from Section IV,
step 6d.
Figure 2-30.
Rear Fuel Tank Strap.
1
5
2
8
2
3
1
4
7
6
4
3
3
1
2
3
5
HULL
Back to Top
