MWO-5-2350-262-35-3

ARMORED COMBAT EARTHMOVER (ACE), M9

MODIFICATION WORK ORDER

  MWO-5-2350-262-35-3 - Page 31 of 45

MWO 5-2350-262-35-3
2-25
3.
Attach right side floor support (Figure 2-31, 3) to rear support (5) and hull using two bolts (1) and flat washers (2)
(4) retained from Section V, step 5.
Figure 2-31.
Floor Support.
4.
Install apron (1826) and blade as follows:
WARNING
Do not stand or work under apron and dozer assembly unless apron lock pins have been
installed.
Failure to comply may result in severe injury or death to personnel.
a.
Install apron wiring harness and attaching hardware retained from Section III, step 2, with gasket
13214E2582, four screws MS35206-215 and lock washers MS35338-40 on apron per TM 5-2350-262-34,
Apron Wiring Harness Replacement.
1
5
2
3
4
1
2


Back to Top