MWO-5-2350-262-35-3
ARMORED COMBAT EARTHMOVER (ACE), M9
MODIFICATION WORK ORDER
MWO-5-2350-262-35-3 - Page 7 of 45
MWO 5-2350-262-35-3
2-1
CHAPTER 2
HYDRAULIC BLADE FOLDER – TRACK TENSIONER (HBF-TT) SYSTEM
IMPROVEMENTS
SUBJECT:
Installation of new steel apron and blade, and track tensioner system.
Installation of new operating
controls for blade folder and track tensioner system.
DATE:
1 August 2006.
DESCRIPTION:
Remove apron and blade to install the steel apron.
Install new configuration track tensioner system.
Install new configuration operating controls for blade folder and track tensioner systems and remove, if exists, semi-
automatic track adjuster system. This MWO is DA Funded for Counter Attack Core Units only.
Other units must self-fund if they want this MWO applied to their M9 ACE.
TM REFERENCES:
The technical manual references in this procedure are:
TM 5-2350-262-10, dated October
1990, with Change 6, dated March 2003, TM 5-2350-262-20-1, dated January 1997, with Change 3, dated March
2000, TM 5-2350-262-20-2, dated January 1997, with Change 3, dated March 2000, TM 5-2350-262-20-3, dated
November 1998, with Change 2, dated March 2000, and TM 5-2350-262-34, dated January 1997, with Change 2,
dated March 2000.
SECTION I
MWO PARTS LIST
Table 2-1.
MWO Parts List.
Part No.
CAGE
NSN
Description
Qty
B1821BH031C113N 80204
Bolt, Machine
8
B1821BH031C350L 80204
Bolt, Machine
3
B1821BH038C075N
80204
Screw, Cap, Hex Head
11
B1821BH050C100N
80204
Screw, Cap, Hex Head
4
CVCV XCN
54035
Valve, Check, Vented
2
CWCG-LGN
54035
Valve, Holding with relief
2
FCCB LAV (2.0
GPM)
54035
Valve, Flow Control
2
GAI/S
54035
Body, Flow Valve
2
HT 2027
09106
Tubing, Plastic, Spiral Wrap, 6 inches
long
1
H2-62-T6
97111
Coupler, Quick Disconnect
1
H2-63-T6
97111
Nipple, Quick Disconnect
1
MS16562-226
96906
Pin, Straight, 0.125 x 1 inch
2
MS21333-105
96906
Clamp Loop
1
MS27183-10
96906
Washer, Flat, ¼ ID
3
MS27183-12
96906
Washer, Flat, 5/16 ID
14
MS27183-14
96906
Washer, Flat, 3/8 ID
13
MS35206-215
80205
Screw, Machine, Pan Head, #4
4
MS35338-40
80205
Washer, Lock
4
MS35338-44
96906
Washer, Lock, ¼ ID
1
MS35338-45
96906
Washer, Lock, 5/16 ID
10
MS35338-46
80205
Washer, Lock, 3/8 ID
7
MS35489-107
96906
Grommet, Nonmetallic, 0.75 ID
4
MS35649-2254
96906
Nut, Plain
3
Back to Top
