TB-9-1000-234-13

EXERCISING OF RECOIL MECHANISMS AND EQUILIBRATORS

TECHNICAL BULLETIN

SEPTEMBER 2010
TB-9-1000-234-13

  TB-9-1000-234-13 - Page 41 of 52

TB 9-1000-234-13
B-11/(B-12 blank)
WARNING
Ensure cylinder support assembly is held in place while the front and rear lower shoes are
removed to prevent injury to personnel.
6. Remove two screws (11) and two flat washers (10) to remove lower rear shoe (9) from cylinder
support assembly (1) (see figure B-8).
7. Remove two screws (8) and two flat washers (7) to remove lower front shoe (6) from cylinder
support assembly (1).
WARNING
Cylinder support assembly weighs 85.7 pounds (38.87 kg). Two individuals are required to
remove cylinder support assembly to prevent injury to personnel.
8. Remove cylinder support assembly (1) from cannon tube (2).
Figure B-8.


Back to Top