TB-9-2510-251-13
TECHNICAL BULLETIN
OPERATOR AND FIELD MAINTENANCE; INSTALLATION MANUAL (INCLUDING REPAIR PARTS LIST); FOR ADD-ON-ARMOR (AoA) AIR CONDITIONING
AUGUST 2007
TB-9-2510-251-13 - Page 66 of 624
2-50
TB 9-2510-251-13
(11)
Install four bolts (12) and tensioner mount bracket (11) to engine.
12
11
12
2-1.2
Installation of Air Conditioning Kit to M1097A2 with GSIE Add-on-Armor (Cont’d).
a. Install Compressor (Cont’d)
Figure 2-73.
Tensioner Mount Bracket
Figure 2-74.
Belt Tensioner Installation
6
7
(12)
Install bolt (6) and belt tensioner to tensioner mount bracket (7) with stop pin in drilled hole.
(13)
Attach compressor/compressor mount brackets to belt tensioner mount bracket and
cylinder head at engine lifting bracket top hole.
(14)
Tighten all compressor mount bolts.
(15)
Remove original belt and install new belt from kit.
(16)
Re-install air intake duct after connecting refrigerant hoses and compressor wire to
compressor.
Back to Top
