TB-9-2510-251-13
TECHNICAL BULLETIN
OPERATOR AND FIELD MAINTENANCE; INSTALLATION MANUAL (INCLUDING REPAIR PARTS LIST); FOR ADD-ON-ARMOR (AoA) AIR CONDITIONING
AUGUST 2007
TB-9-2510-251-13 - Page 72 of 624
2-56
TB 9-2510-251-13
(23) Two-door vehicles only:
a. Mount angles (29) with top gusseted section facing inward toward rear center of vehicle
and perpendicular side facing outward.
b. Secure with bolts in second slot (31) from the end of condenser mount angle.
29
29
30
2-1.2
Installation of Air Conditioning Kit to M1097A2 with GSIE Add-on-Armor (Cont’d).
b. Install Evaporator and Condenser (Cont’d)
NOTE
For correct installation of compressor mount angles, bar in bottom of rear
curtain should be below compressor mount angles and not between angles
and armor plate.
COMPRESSOR
MOUNT ANGLE
COMPRESSOR
MOUNT ANGLE
Figure 2-85.
Compressor Mount Angle
Figure 2-86.
Mount Angles (Four-Door)
29
31
29
Figure 2-87.
Mount Angles (Two-Door)
(22)
Four-door vehicles only:
a. Mount angles (29) with top gusseted section facing inward toward rear center of vehicle
and perpendicular side facing outward.
b. Secure with bolts in lower slot (30).
Back to Top
