TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 73 of 704
0007-27
Change 1
TB 9-3950-253-13&P
0007
LOAD WITH EMPTY LIFT FRAME – CONTINUED
5. As soon as lift mechanism reaches 2 ft (61 cm) above home position, release joystick (Figure 38, Item 1) (PLS:
TM 9-2320-364-14&P, HEMTT: TM 9-2320-326-14&P).
Figure 38.
Lift Mechanism Home Position.
07
END OF TASK
STOW LIFT FRAME
0007
1. Verify these conditions exist:
a. Hook arm 2 ft (61 cm) above home position (PLS: TM 9-2320-364-14&P, HEMTT: TM 9-2320-326-14&P).
b. Lift frame suspended on hook (
Retrieve Lift Frame
).
c.
MODE switch set to AUTO (PLS: TM 9-2320-364-14&P, HEMTT: TM 9-2320-326-14&P).
d. Stowage toggle switch set to OFF position (WP 0004).
e. NO TRANS light off (PLS: TM 9-2320-364-14&P, HEMTT: TM 9-2320-326-14&P).
f.
Container locking pins on lift frame in stowed position (
Release Locking Pins
in this work package).
2. At stowage control panel (Figure 39, Item 1), set toggle switch (Figure 39, Item 2) to AUTO.
Figure 39.
Toggle Switch at AUTO.
07
467-077
1
467-168
1
Back to Top
