TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 70 of 704
TB 9-3950-253-13&P
Change 1
0007-24
0007
PICK UP LIFT FRAME FROM GROUND – CONTINUED
WARNING
•
These instructions require adjustments to the lift frame. Beware that frame may swing on
hook, especially in high winds.
•
During these adjustments, personnel are required to work outside the vehicle where there
are several projecting parts, and personnel are required to bend down. Take care when
bending and straightening. A hard hat is required.
•
Failure to follow these warnings may result in injury to personnel.
NOTE
Perform steps 14 and 15 for right and left stands.
14. With stand (Figure 34, Item 3) in deployed position on lift frame (Figure 34, Item 1), remove locking pin (Figure 34,
Item 4) from stand.
15. Rotate stand (Figure 34, Item 3) upward until hole in stand aligns with hole in upper bracket (Figure 34, Item 2)
and insert locking pin (Figure 34, Item 4).
Figure 34.
Stow Stands.
07
END OF TASK
467-174
1
3
4
3
2
1
Back to Top
