TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 67 of 704
0007-21
Change 1
TB 9-3950-253-13&P
0007
PICK UP LIFT FRAME FROM GROUND – CONTINUED
7. Keeping engine at idling speed, slowly reverse vehicle to position hook (Figure 30, Item 3) under bail bar (Fig-
ure 30, Item 2). Use joystick (Figure 30, Item 1) to adjust hook to locate it on bail bar.
Figure 30.
Hook Located on Bail Bar.
07
WARNING
Bail bar lock MUST be securely installed on hook before continuing with procedure.
Without bail bar lock installed, lift frame may disengage from hook and fall to ground.
Failure to follow this warning may result in injury or death to personnel.
8. Remove snap pin (Figure 31, Item 2) from locking bar (Figure 31, Item 3).
9. Remove locking bar (Figure 31, Item 3) and bail bar lock (Figure 31, Item 4) from lift frame (Figure 31, Item 1).
Figure 31.
Bail Bar Lock Stowed on Lift Frame.
07
467-092
1
2,3
Back to Top
