TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 61 of 704
0007-15
Change 1
TB 9-3950-253-13&P
0007
PLACE LIFT FRAME ON GROUND – CONTINUED
NOTE
Do not fully disengage hook. Ensure hook surrounds bail bar but is not applying pressure
to it.
7. Move vehicle forward and lower hook (Figure 18, Item 1) until lift frame (Figure 18, Item 2) and stand are
placed fully on ground.
Figure 18.
Lift Frame at Vertical Position and Fully on Ground.
07
WARNING
Lift frame must be firmly positioned on solid, level ground with adequate support from
stands. Failure to follow this warning may result in injury or death to personnel and
damage to equipment.
8. Exit cab to check lift frame is firmly positioned on ground with adequate support from stands.
WARNING
Undue force or motion exerted on lift frame could cause it to fall over. If conditions require
(e.g., your view of the lift frame is inadequate, uneven ground conditions), obtain
assistance from an observer on the ground to guide you in moving the hook. Failure to
follow this warning may result in injury or death to personnel and damage to equipment.
9. Remove snap pin (Figure 19, Item 2) from locking bar (Figure 19, Item 3).
10. Remove locking bar (Figure 19, Item 3), and bail bar lock (Figure 19, Item 4) from hook (Figure 19, Item 1).
467-080
2
1
Back to Top
