TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 56 of 704
TB 9-3950-253-13&P
Change 1
0007-10
0007
UNLOAD AN EMPTY LIFT FRAME
0007
1. Verify these conditions exist:
a. Lift frame supported by hook (
Retrieve Lift Frame - Stage 2)
.
b. Bail bar lock installed on hook (
Retrieve Lift Frame - Stage 1
).
c.
MODE switch set to OFF position (PLS: TM 9-2320-364-14&P, HEMTT: TM 9-2320-326-14&P).
d. Stowage toggle switch set to OFF position (WP 0004).
e. NO TRANS light off (PLS: TM 9-2320-364-14&P, HEMTT: TM 9-2320-326-14&P).
WARNING
•
Use a ground guide at all times when unloading/loading lift frame.
•
Use extreme caution if high wind conditions exist while unloading lift frame. With
assistance, attach guide straps to the legs of the lift frame to stabilize the lift frame during
the unloading procedure.
•
Failure to follow this warning may result in injury to personnel and damage to equipment.
2. With engine at idle speed, set MODE switch (Figure 9, Item 1) to AUTO position (PLS: TM 9-2320-364-14&P,
HEMTT: TM 9-2320-326-14&P).
Figure 9.
MODE Switch at AUTO Position.
07
467-045
1
Back to Top
