TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 48 of 704
TB 9-3950-253-13&P
Change 1
0007-2
0007
RETRIEVE LIFT FRAME
0007
Retrieve Lift Frame - Stage 1
0007
NOTE
If lift frame is to be placed on ground, slider beds can be in either configuration.
1. Verify these conditions exist:
a. Lift mechanism in home position (PLS: TM 9-2320-364-14&P, HEMTT: TM 9-2320-326-14&P)
b. Vehicle in neutral gear and parking brake applied (PLS: TM 9-2320-364-14&P, HEMTT: TM 9-2320-326-
14&P).
c.
MODE switch set to OFF (PLS: TM 9-2320-364-14&P, HEMTT: TM 9-2320-326-14&P).
2. Start engine and run at idle speed (PLS: TM 9-2320-364-14&P, HEMTT: TM 9-2320-326-14&P).
3. In cab, set MODE switch (Figure 1, Item 1) to AUTO position (PLS: TM 9-2320-364-14&P, HEMTT: TM 9-2320-
326-14&P).
4. At stowage control panel (Figure 1, Item 2) set toggle switch (Figure 1, Item 3) to AUTO position.
Figure 1.
MODE Switch and Stowage Control Panel.
07
467-167
3
2
1
Back to Top
