TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 52 of 704
TB 9-3950-253-13&P
Change 1
0007-6
0007
RETRIEVE LIFT FRAME – CONTINUED
Retrieve Lift Frame - Stage 1 – Continued
0007
WARNING
•
During these procedures, operator will be required to climb on and around the vehicle. Be
sure to wear suitable footwear and ensure no surfaces are slippery. Wear suitable gloves
and hard hat.
•
Bail bar lock MUST be securely installed on hook before continuing with procedure.
Without bail bar lock installed, lift frame may disengage from hook and fall to ground.
•
Failure to follow these warnings may result in injury or death to personnel.
9. Remove snap pin (Figure 5, Item 2) from locking bar (Figure 5, Item 3).
10. Remove locking bar (Figure 5, Item 3), and bail bar lock (Figure 5, Item 4) from lift frame (Figure 5, Item 1).
Figure 5.
Bail Bar Lock Stowed on Lift Frame.
07
Back to Top
