TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 71 of 704
0007-25
Change 1
TB 9-3950-253-13&P
0007
LOAD WITH EMPTY LIFT FRAME
0007
1. Verify these conditions exist:
a. Lift mechanism in deployed position (PLS: TM 9-2320-364-14&P, HEMTT: TM 9-2320-326-14&P).
b. Lift mechanism hook surrounds bail bar of lift frame (
Attach Lift Frame to Container
).
c.
Bail bar lock installed on hook (
Install Bail Bar Lock
).
d. MODE switch set to AUTO (PLS: TM 9-2320-364-14&P, HEMTT: TM 9-2320-326-14&P).
e. Stowage toggle switch set to OFF position (WP 0004).
f.
NO TRANS light on (PLS: TM 9-2320-364-14&P, HEMTT: TM 9-2320-326-14&P).
WARNING
•
Bail bar lock MUST be securely installed on hook before continuing with procedure.
Without bail bar lock installed, lift frame may disengage from hook and fall to ground.
•
DO NOT move vehicle while lift frame is suspended on hook.
•
Failure to follow these warnings may result in injury or death to personnel and damage to
equipment.
CAUTION
Immediately reduce engine speed and release joystick if lift frame sways excessively or
makes contact with any part of the load handling equipment. Failure to follow this caution
may result in damage to equipment.
2. With engine at idling speed, set MODE switch (Figure 35, Item 1) to AUTO (PLS: TM 9-2320-364-14&P,
HEMTT: TM 9-2320-326-14&P).
Figure 35.
MODE Switch at AUTO.
07
467-045
1
Back to Top
