TM 5-2350-377-14&P
0015 00
0015 00-2
TRACK AND BLADE CONTROL BOX REPLACEMENT - Continued
ASSEMBLY
NOTE
Steps 1 through 5 apply to Figure 1 on previous page.
1. Slide track & blade control box (item 2) behind instrument panel (item 4) and install two washers (item 5) and two
screws (item 6).
2. Install manifold harness connector (item 3) on track & blade control box (item 2).
3. Install control box power harness connector (item1) on track & blade control box (item 2).
4. Connect negative battery cables (TM 5-2350-262-20-1).
5. Close battery box (TM 5-2350-262-10).
END OF WORK PACKAGE