TM-5-2350-377-14-P
ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER (HBF-TT)
TM-5-2350-377-14-P - Page 118 of 335
TM 5-2350-377-14&P
DISASSEMBLY
NOTE
Steps 1 and 2 apply to Figure 6.
Screws are captive to holder and stay on holder.
1. Unscrew five screws (item 3) on
holder (item 2).
2.
Remove holder (item 2) from body (item 1).
Pull out rubber round seal (item 4) from holder (item 2).
Figure 6.
Headlight Rubber Round Seal.
0018 00-1
0018 00
HEADLIGHT LENS HOLDER
AND LIGHT FILTER, LIGHT LENS, AND
RUBBER ROUND SEAL REPLACEMENT
INITIAL SETUP
Tools/Test Equipment
Tool kit, general mechanic's
(Item 6, WP 0056 00)
Chemical and oil protective gloves
(Item 12, WP 0055 00)
Industrial goggles (Item 13, WP 0055 00)
Materials/Parts:
Acid swabbing brush (Item 4, WP 0055 00)
Sealant adhesive
(Item 1, WP 0055 00)
Cleaning solvent (Item 7, WP 0055 00)
Equipment Conditions
Front of vehicle blocked
(TM 5-2350-262-20-1)
Hydraulic pressure relieved (TM 5-2350-262-20-1)
Negative battery cables disconnected
(TM 5-2350-262-20-1)
Wiping rag (Item 18, WP 0055 00)
Rubber round seal (nonmetallic)
(Item 14, WP 0048 00, Figure 10) (1)
Rubber round section (Item 15, WP 0048 00, Figure 10)
3
1
2
3
2
4
Back to Top
