TM-5-2350-377-14-P

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER (HBF-TT)

TM-5-2350-377-14-P - Page 123 of 335

TM 5-2350-377-14&P

0019 00-2

0019 00

HEADLIGHT INCANDESCENT LAMP REPLACEMENT - continued

ASSEMBLY

NOTE

Steps 1 through 4 apply to Figure 10.

1. Push plug (item 4) on back of lamp (item 1).

2. Place right side of lamp (item 1) in mount (item 2).

Align tab (item 5) with slot (item 3).

Align edge of mount

(item

2).

Start lamp (item 1) under edge of mount (item

2).

Work rest of mount (item

2) around lamp (item

1) with

screwdriver.

Make sure lamp (item 1) is straight in mount (item 2).

3. Install cover (item 7) to headlight mount (2) and secure with five screws (item 6).

4. Install left or right headlight lens holder and light filter, light lens, and rubber round seal (WP 0018 00, Assembly).

END OF WORK PACKAGE