TM-5-2350-377-14-P

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER (HBF-TT)

TM-5-2350-377-14-P - Page 128 of 335

TM 5-2350-377-14&P

APRON AND DOZER ASSEMBLY REPLACEMENT AND REPAIR

REMOVAL

WARNING

Lifting device must have a weight capacity greater than 2,944 lb (1,337 kg).

Do not stand or work under apron and dozer assembly unless apron lockpins are installed.

Failure to comply may result in severe injury or death to personnel.

NOTE

Step 1 applies to Figure 15.

1. Fold and lock dozer blade into travel mode before connecting chain and lifting device to lifting eye shackles (1) of

apron and dozer assembly (2).

Raise apron and dozer assembly about 6 in. (15 cm) and support with blocks under

dozer blade (3).

Figure 15.

Installing Support Blocks.

0022 00-1

0022 00

INITIAL SETUP

Tools/Test Equipment

Tool kit, general mechanic's

(Item 6, WP 0056 00)

Shop equipment, common no. 1

(Item 2, WP 0056 00)

Equipment Conditions

Front of vehicle blocked

(TM 5-2350-262-20-1)

Apron cylinder armor removed

(TM 5-2350-262-20-1)

Chain Assembly

(TM 5-2350-262-10)

Personnel Required:

Two Construction Equipment Repairer 62B10