TM-5-2350-377-14-P

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER (HBF-TT)

TM-5-2350-377-14-P - Page 136 of 335

TM 5-2350-377-14&P

0022 00

APRON AND DOZER ASSEMBLY REPLACEMENT AND REPAIR - continued

NOTE

Steps 10 through 12 apply to Figure 25.

10. Remove locknut (11), screw (12), and stop (13) from each side of apron (4).

Discard locknut (11).

11. Remove lockpin assembly (14), and latch (15) from each side of apron (4).

12. Remove six self-locking screws (16), three straps (17), and three rings (18) from rear of apron (4).

Discard self-locking

screws (16).

Figure 25.

Apron.

NOTE

Step 13 applies to Figure 26.

13. Remove locknut (19), nut (20), two washers (21), stud (22), and lifting eye shackle (23) from each side of apron (4).

Discard locknuts (19).

0022 00-9